Metal Wall Hooks Openwork Pattern Dog Cartoon Children Coat Hanger H701

Common Methods for Installing Wall Hooks

There are several common ways to install wall hooks, depending on the type of hook and the wall material. Here are some common installation methods:

1. Self-Adhesive Hooks
Features: Easiest to install, no tools required, minimal damage to the wall.
Applicable Walls: Smooth, clean, and dry surfaces such as tiles, glass, metal, smooth wooden boards. Not suitable for rough, peeling paint, or damp walls.
Installation Steps:
Clean and dry the wall surface in the installation area, ensuring no dust or oil stains.
Peel off the protective film from the back of the hook.
Press the hook firmly onto the wall for about 30 seconds to ensure full adhesion.
Wait for a period (usually 24 hours is recommended) before hanging items to allow the adhesive to fully cure.

2. Punch-Free Strong Suction Cup Hooks
Features: Easy to remove and reuse, no damage to the wall.
Applicable Walls: Also suitable for smooth, non-porous surfaces like tiles and glass.
Installation Steps:
Clean and dry the wall surface in the installation area.
Press the suction cup firmly against the wall, ensuring all air inside the suction cup is expelled.
Some suction cup hooks have a rotating or pressing lock; engage it to enhance suction.

3. Nail/Screw Fixed Hooks
Features: Strong load-bearing capacity, most secure, suitable for hanging heavier items.
Applicable Walls: Various wall types, but require selecting appropriate nails/screws and tools based on the wall material.
Installation Steps:
Wooden Walls:
Determine the installation location.
Screw the screw directly into the wooden wall using a screwdriver or electric drill.
For smaller hooks, you can also directly hammer a nail in.
Drywall/Hollow Brick Walls:
Determine the installation location.
Use an electric drill to drill a hole slightly smaller than the expansion bolt.
Insert the expansion bolt (or drywall anchor) into the hole.
Align the hook with the expansion bolt, and tighten the screw with a screwdriver or electric drill to expand and secure the anchor inside the wall.
Concrete/Solid Brick Walls:
Determine the installation location.
Use an impact drill or hammer drill to drill a hole slightly smaller than the expansion bolt.
Tap the expansion bolt (or plastic expansion plug) into the hole until it is flush with the wall surface.
Align the hook with the expansion bolt, and tighten the screw with a screwdriver or electric drill.

Before Installation, Please Note:
Check Inside Walls: Before drilling, it’s best to use a line detector to check for wires, pipes, etc., inside the wall to avoid damage.
Load-Bearing Capacity: Choose the appropriate hook and installation method based on the weight of the items you plan to hang.
Tools: Prepare the necessary tools according to the installation method, such as a tape measure, pencil, spirit level, electric drill, screwdriver, hammer, etc.
Read Instructions: Carefully read the product manual for the hooks you purchased to understand specific installation requirements and precautions.

FAQ

1. What format of the file do you need if I want my own design of products?

We have our own designer in house . So you can provide JPG, AI,cdr,dwg,max,prt,step or PDF ,etc.We will make 3D drawing for mold or printing screen for your final confirmation based on technique.

2. How long is the products sample lead time?

For existing samples, it takes 2-3 days. They are free. If you want your own designs, it takes 5-7 days, depends on the complexity of your design, etc. Anyway, we will response fast to your request.

3. Which kinds of certificate would you have?

LFGB ,REACH,ISO9001,SEDX, If necessary, we can pass the certificate you need.

Jiangmen Banyan Metal Company Limited is located in Jiangmen city, Guangdong and is a best household metal products and wholesale kitchenware, specialized in houseware, kitchenware, barware, wire products, bathrooms, wholesale coffee tools etc.